1. Setting Up the Device
  2. Class 1/Division 2 Compliant Tablet
  • ET6x Rugged Enterprise Tablet Quick Start Guide
Class 1/Division 2 Compliant Tablet
View content for :
Product:

Class 1/Division 2 Compliant Tablet

ET6x devices that support Class 1/Division 2 requirements can be used in hazardous areas as long as the electronic parts are securely covered. A hazardous area is a location that has a higher risk of explosion and/or fire than a normal industrial area. This is due to the properties of the materials handled or stored there.
The ET6x comes with screws to secure the battery access and USB ports. Ensure that you install the screws before entering a hazardous area.
Only the ET6x tablet or the ET6x tablet with the attached ET6x Keyboard can be used in hazardous locations.
  1. Align two M2x3 Philips head screws with the battery release latches.
    Align two M2x3 Torx head screws with the battery release latches.
    Secure battery latches
    battery latches
    battery latches - et6x win
  2. Using a Philips screwdriver, secure the screws to the latches.
    Using a Torx screwdriver, secure the screws to the latches, and torque to 2.5 kg-cm (2.2 lbf.in).
  3. Torque the screws to 2.5 kg-cm (2.2 lbf·in).
  4. Align one M2x3 Philips head screw with the access door.
    Align one M1x2 Torx head screw with the access door.
    Secure access door
    access door
    Secure access door - ET6x Win
  5. Using a Philips screwdriver, secure the screw to the access door.
    Using a Torx screwdriver, secure the screw to the access door, and torque to 2.5 kg-cm (2.2 lbf·in).
    Ensure to close the access door and move the latch to the locked position.
    close the access door- et6x win
  6. Torque the screw to 2.5 kg-cm (2.2 lbf·in).