配置 RS-232 设备端口

配置 RS-232 设备端口

要配置该设备端口:
  1. 关闭 MP72 电源(拔下电源线)。
  2. 拔下所有 RS-232 设备(扫描器、Sensormatic 和/或双电缆电子秤)。
  3. 打开 MP72 电源(重新连接电源线)。
  4. 扫描相应的 RS-232 设备端口配置条码,以选择要连接到 MP72 的设备和端口。
  5. 关闭 MP72 的电源。
  6. 连接适当的设备。
    确保连接到 MP72 的设备与所选的设备端口配置选项正确匹配。例如,如果选择了选项 1,请确保将双电缆电子秤连接到 Aux 1 端口,并将 RS-232 扫描器连接到 Aux 2 端口。如果连接的设备与所选选项不匹配,则打开 MP72 可能会导致通信故障。
  7. 打开 MP72 的电源。
特定于设备的默认值(继承的默认值)
设备
波特
数据位
停止位
奇偶校验
扫描器
9600
8
1
Sensormatic
9600
8
1
双电缆电子秤:SASI 协议
9600
7
1
偶校验
双电缆电子秤:DIGI 协议
9600
7
2
偶校验
双电缆电子秤:ICL 协议
9600
7
1
偶校验
第三方电子秤
不适用
不适用
不适用
不适用
可用的配置/选项包括:
  • *0 = Aux 1 Sensormatic, and Aux 2 Scanner(0 = Aux 1 Sensormatic,Aux 2 扫描器)
  • 1 = Aux 1 Dual Cable Scale and Aux 2 Scanner(1 = Aux 1 双电缆电子秤,Aux 2 扫描器)
  • 2 = Aux 1 Sensormatic, and Aux 2 Dual Cable Scale(2 = Aux 1 Sensormatic,Aux 2 双电缆电子秤)
  • 4 = Aux 1 Third Party Scale, Aux 2 Sensormatic(4 = Aux 1 第三方电子秤,Aux 2 Sensormatic)
  • 5 = Aux 1 Sensormatic, and Aux 2 Disabled(5 = Aux 1 Sensormatic,Aux 2 已禁用)
  • 6 = Aux 1 Dual Cable Scale, and Aux 2 Disabled(6 = Aux 1 双电缆电子秤,Aux 2 已禁用)
  • 7 = Aux 1 Third Party Scale, and Aux 2 Disabled(7 = Aux 1 第三方电子秤,Aux 2 已禁用)
  • 8 = Aux 1 Disabled, and Aux 2 Scanner(8 = Aux 1 已禁用,Aux 2 扫描器)
  • 9 = Aux 1 Disabled, and Aux 2 Dual Cable Scale(9 = Aux 1 已禁用,Aux 2 双电缆电子秤)
  • 10= Aux 1 Disabled, and Aux 2 Sensormatic(10 = Aux 1 已禁用,Aux 2 Sensormatic)
  • 11= Aux 1 Disabled, and Aux 2 Disabled(11 = Aux 1 已禁用,Aux 2 已禁用)
第三方电子秤配置仅适用于不带电子秤(型号以 MP7200- 开头)销售的 Zebra Bioptic 系统。带电子秤销售的 Zebra 双窗式系统(型号以 MP7201-、MP7202-、MP7203-、MP7204- 开头)不支持第三方电子秤配置。