To read a barcode, a scan-enabled application is required. The device contains the DataWedge application, which allows you to enable the imager, decode the barcode data, and display the barcode content.
Ensure that an application is open on the device and a text field is in focus (text cursor in the text field).
Point the scanner exit window of the device at a barcode.
Press and hold the scan button.
The device projects the aiming pattern.
When the device is in Pick List Mode, the device does not decode the barcode until the center of the dot touches the barcode.
Ensure the barcode is within the area formed by the aiming pattern. The aiming dot is used for increased visibility in bright lighting conditions.
SE4720
SE4720 Picklist Mode
The Data Capture LED lights green, and a beep sounds, by default, to indicate the barcode was decoded successfully.
Release the scan button.
Imager decoding usually occurs instantaneously. The device repeats the steps required to take a digital picture (image) of a poor or difficult barcode as long as the scan button remains pressed.
The device displays the barcode data in the text field.
