• TC21/TC26/TC21-HC/TC26-HC Touch Computer
Installing the Ethernet Module
Installing the Ethernet Module

Installing the Ethernet Module

  1. Insert the Ethernet Module into the cradle.
  2. Push the module in until it is seated properly. The USB micro-B connector on the Ethernet module plugs into the USB micro-AB port on the cradle.
  3. Connect the cables as shown in the following figure.
    1
    DC Power Port
    2
    RJ-45 Port
    3
    USB micro-AB Port
    4
    USB micro B Connector
    5
    USB A Connector
    6
    Ethernet Cable