Installation
Installation

Installation

To install the Basic Hand Strap Kit:
  1. Remove the two rubber plugs on the back of the device.
    remove plugs
  2. Align the top cap onto the device.
  3. Rotate the top cap over the top of the device.
    rotate top cap
  4. Insert the tab end of the hand strap into the slot on the device.
    insert end into device slot
  5. Feed the tab into the cut in the strap.
    feed tab into strap slot
  6. Align the hand strap clip with the top cap.
  7. Push the clip onto the top cap.
    press clip onto top cap