Use the Rack/Wall Mount Bracket to mount four 4-Slot Battery Chargers on a rack. When installing on a rack, first assemble the bracket and chargers and then install the assembly on the rack.
Place one power supply horizontally in the bottom tray.
Place another power supply vertically in the bottom tray.
Connect AC line cords to the power supplies.
Connect DC line cords to the power supplies.
Secure the power supplies and cables to the bottom tray with tie wraps.
Route the cables through the cable slots.
1
DC Y cable 1
2
DC Y cable 2
3
Power supply 1
4
Power supply 2
5
AC line cord 2
6
AC line cord 1
Slide the top tray onto the bottom tray until the top tray touches the vertical power supply.
Install 16 M2.5 studs onto the top tray as shown.
Align and install a 4-Slot Battery Charger onto each set of four studs.
Connect DC Y cables to the four 4-Slot Battery Chargers.
Secure the top tray to the bottom tray with four M5 screws (two on each side).
