Use the Rack/Wall Mount Bracket to mount four 4-Slot Battery Chargers on a rack. When installing on a rack, first assemble the bracket and chargers and then install the assembly on the rack.
Place one power supply horizontally in bottom tray.
Place one power supply vertically in bottom tray.
Connect AC line cords to power supplies.
Connect DC line cords to power supplies.
Secure power supplies and cables to bottom tray with tie wraps.
Route cables through cable slots.
1
DC Y cable 1
2
DC Y Cable 2
3
Power supply 1
4
Power supply 2
5
AC line cord 2
6
AC line cord 1
Slide top tray onto bottom tray until top tray touches vertical power supply.
Install 16 M2.5 studs onto top tray as shown below.
Align and install 4-Slot Battery Charger onto four studs.
Connect DC Y cables to four 4-Slot Battery Chargers.
Secure top tray to bottom tray with four M5 screws (two on each side).
See Rack Mount Installation on page 170 for installing the bracket onto a rack.
