Adjusting the Print Width
Adjusting the Print Width

Adjusting the Print Width

Print width must be set when you are using the printer for the first time or there is a change in media width.
Print width may be set by:
  • The Windows printer driver or application software such as ZebraDesigner.
  • The five-flash sequence in Feed Button Modes.
  • Controlling printer operations with ZPL programming; refer to the Print Width (
    ^PW
    ) command (consult your ZPL Programming Guide).
  • Controlling printer operations with EPL Page Mode programming, refer to the Set Label Width (
    q
    ) command (consult your EPL Programmer’s Guide).