Solutions
Products
Support and Downloads
About Zebra
GK888t Desktop Thermal Printer User Guide
About This Guide
Notational Conventions
Icon Conventions
Introduction
GK888t Thermal Printers
What's in the Box
Unpack and Inspect the Printer
Your Printer
Opening the Printer
Printer Features
Operator Controls
Power Switch
Feed Button
Status Light
Closing the Printer
Getting Started
Printer Setup Overview
Attaching Power
Loading Media
Preparing the Media for Loading
Placing the Roll in the Media Compartment
Loading the Transfer Ribbon
Printing a Test (Printer Configuration) Label
Connecting Your Printer to a Device
Connecting to a Phone or Tablet
Installing Drivers and Connecting to a Windows-Based Computer
Pre-install Windows Printer Drivers
Installing the Drivers
Running the Printer Installation Wizard
Plug'n'Play (PnP) Printer Detection and Windows Operating Systems
Ethernet
Serial Port and Windows Operating Systems
Universal Serial Bus Device Communications
Interface Cable Requirements
USB Interface Requirements
Serial Communications
Autobaud
ZPL ^SC Command
EPL Y Command
Resetting the Default Serial Port Parameters
Parallel Port
Ethernet Port
Ethernet Status/Activity Indicators
After Your Printer is Connected
Testing Communications by Printing
Test Printing with Zebra Setup Utility
Test Printing with Windows Printer and Faxes Menu
Test Print on an Ethernet Printer
Test Print with a Copied ZPL Command File
What to Do If You Forget to Install Printer Drivers First
Print Operations
Determining Printer Configuration
Long Term Printer Inactivity or Storage
Thermal Printing
Modes of Printing
Print Media Types
Determining Thermal Media Types
Replacing Supplies
Adding a New Transfer Ribbon
Replacing a Partially Used Transfer Ribbon
Adjusting the Print Width
Adjusting the Print Quality
Media Sensing
Ribbon Overview
When to Use Ribbon
Coated Side of Ribbon
Ribbon Test with Adhesive
Ribbon Scratch Test
Printing on Fan-Fold Media
Printing with Externally Mounted Roll Media
Externally Mounted Roll Media Considerations
Fonts and Your Printer
Localizing the Printer with Code Pages
Identifying Fonts in Your Printer
ZPL Fonts
EPL Fonts
Standalone Printing
Sending Files to the Printer
Print Meter
Printer Options
Label Dispenser Option
Cutter Option
Loading Media with the Cutter Option
ZebraNet 10/100 Internal (Wired) Print Server Option
Printer Network Configuration Status Label
Zebra KDU — Printer Accessory
KDU Plus — Printer Accessory
ZBI 2.0 Zebra Basic Interpreter
Maintenance
Cleaning
Cleaning the Printhead
Cleaning the Media Path
Cleaning the Sensor
Platen Cleaning and Replacement
Other Printer Maintenance
Replacing the Printhead
Troubleshooting
Status Light Descriptions
Status Light Error Resolutions
Print Quality Problems
Manual Calibration
Troubleshooting Tests
Resetting the Factory Default Values
Communications Diagnostics
Feed Button Modes
Interface Wiring
Universal Serial Bus Interface
Parallel Interface
Ethernet Interface
Serial Port Interface
Dimensions
External GK888t Printer Dimensions
Label Dispenser Dimensions
Cutter Dimensions
ZPL Configuration
Managing the ZPL Printer Configuration
ZPL Printer Configuration Format
ZPL Configuration Status to Command Cross-Reference
Printer Memory Management and Related Status Reports
ZPL Programming for Memory Management
ZPL ^SC Command
ZPL ^SC Command
ZPL ^SC Command
Use the Set Communications (^SC) command to change the communications settings on the printer.
With the host computer set at the same communications settings as the printer, send the
^SC
command to change the printer to the desired settings.
Change the host computer settings to match the new printer settings.
Refer to the ZPL Programming Guide for more information about this command.
Serial Communications
