With a sample of your media, adjust the media roll holders to the width of the media. The hangers should just touch, but not restrict, the edges of the media.
Tighten the screw using a small Phillips driver #1.
With a sample of your media, adjust the guides to the width of the media. The guides should just touch, but not restrict, the edges of the media.
Run the media between the media guide and roll holders.
After printing or feeding several labels: If the media does not track down the center (moves from side to side) or the sides of the media (liner, tag, paper, etc.) are frayed or damaged when exiting the printer, then the media guides or roll holders may need further adjustment.
