Cleaning the Media Path
Cleaning the Media Path

Cleaning the Media Path

Use a cleaning swab to remove debris, dust, or crust that may have built up on the holders, guides, and media path surfaces.
  • Use the alcohol in the cleaning swab to soak the debris to break up the adhesive.
  • Wipe the ridges to remove accumulated debris.
  • Wipe the inside edges of both edge guides to remove any built-up residue.
  • Wait one minute before closing the printer.
  • Discard the cleaning swab and use a new one for each cleaning.
Media Path components
1
Ridges
2
Pinch roller
3
Peel bar
4
Platen
5
Media guides