1. ZT411/ZT421 Industrial Printer User Guide
  2. Printer Setup
  3. Connecting the Printer to a Device
  4. Connecting to a Computer Using the Printer’s USB Port
  • ZT411/ZT421 Industrial Printer User Guide
Connecting to a Computer Using the Printer’s USB Port
Connecting to a Computer Using the Printer’s USB Port
View content for :
Product:

Connecting to a Computer Using the Printer’s USB Port

  1. After you install the drivers, remove the label that covers the USB port.
    Removing the label covering the USB port.
  2. Connect the USB cord to the USB port on your printer.
    Insert the USB cord into the connector on the back of the printer.
  3. Connect the other end of the USB cord to your computer.
  4. Plug the A/C power cord into the A/C power connector on the back of the printer.
    Insert the power cord into the connector on the back of the printer.
  5. Plug the A/C power cord into an appropriate power outlet.
    Plug power cord into an outlet
  6. Turn on (
    I
    ) the printer.
    Turning on the printer.
    As the printer boots up, your computer completes the driver installation and recognizes your printer.
    If you need to power cycle the printer, allow it to fully boot up first. Then after turning it off, wait 30 seconds before turning it back on. Power cycling the printer too quickly can cause issues.
    If you did not install the drivers first, see What to Do If You Forget to Install Printer Drivers First.