ZT411/ZT421 Industrial Printer User Guide

Running the Printer Installation Wizard

On the last screen of the driver installer, leave

Run the Printer Installation Wizard

checked, then click

Finish

.

The Printer Installation wizard displays.

Click

Install Printer Driver

.

The license agreement displays.

Read and accept the terms of the license agreement, and then click

Select the communication option that you want to configure for your printer:

Network Port—or installing printers with an Ethernet (LAN) or wireless (Wi-Fi) network connection. Wait for the driver to scan your local network for devices and follow the prompts. If necessary, set the values as directed in Connecting to Your Network through the Printer’s Ethernet Port or in Connecting the Printer to Your Wireless Network.

USB Port—For installing printers connected with the USB cable. Connect the printer to the computer as shown in Connecting to a Computer Using the Printer’s USB Port. If the printer is already connected and powered on, you may need to remove the USB cable and install it again. The driver will automatically search for the model of the connected printer.

Bluetooth Port—For installing printers with a Bluetooth connection.

Other—For installation using another type of cable, such as Parallel (LPT) and Serial (COM). No additional configuration is necessary.

If prompted, select your printer model and resolution.

The model and resolution are on a part number sticker on the printer, usually located below the media hanger. The information will be in the following format:

Part Number: XXXXXxY – xxxxxxxx

where

XXXXX

= the printer model, and

Y

= the printer resolution (

2

= 203 dpi,

3

= 300 dpi,

6

= 600 dpi).

For example, in the part number

ZT411x3 – xxxxxxxx

,

ZT411

indicates that the printer is a ZT411 model, and

3

indicates that the printhead resolution is 300 dpi.