Liner Take-Up Option
a. For both the Rewind option and the Liner Take-Up option: Thread the liner into the slot below the peel assembly.
b. Feed the liner under the media alignment roller.
b. Slide the liner into the slot in the liner take-up spindle.
c. Loosen the thumbscrew on the rewind media guide.
c. Push the liner back until it touches the back plate of the liner take-up spindle assembly.
d. Slide the rewind media guide all the way out, and then fold it down.
d. Wrap the liner around the liner take-up spindle and turn the spindle counterclockwise to tighten the liner.
For the Liner Take-Up option, loading of the liner is complete. Continue on to step 9.
e. Slide an empty core onto the rewind spindle.
f. Wrap the liner around the core as shown, and then turn the rewind spindle to tighten the media.
Ensure that the edge of the media is flush against the backplate of the rewind spindle.
g. Fold up the rewind media guide, and then slide it in until it touches the liner.
h. Tighten the thumbscrew on the rewind media guide.
Loading of the liner is complete. Continue with step 9.