ZT411 | ZT421 | |||
|---|---|---|---|---|
Label length | Minimum | Non-RFID | ||
Tear-off | 12.7 mm (0.5 in.) | 12.7 mm (0.5 in.) | ||
Peel-off | 12.7 mm (0.5 in.) | 12.7 mm (0.5 in.) | ||
Rewind | 12.7 mm (0.5 in.) | 12.7 mm (0.5 in.) | ||
Cutter | 25.4 mm (1.0 in.) | 25.4 mm (1.0 in.) | ||
Linerless cutter | 51 mm (2.0 in.) | N/A | ||
RFID | Varies for each transponder type | |||
Maximum | 200 or 300 dpi | 991 mm (39 in.) | 991 mm (39 in.) | |
600 dpi | 508 mm (20 in.) | N/A | ||
Maximum continuous media print length | 200 dpi | 3988 mm (157 in.) | 2590 mm (102 in.) | |
300 dpi | 1854 mm (73 in.) | 1143 mm (45 in.) | ||
600 dpi | 991 mm (39 in.) | N/A | ||
Label width | Minimum | Non-RFID | 25.4 mm (1.0 in.) | 51 mm (2 in.) |
RFID | Varies for each transponder type | |||
Maximum | Tear-off, Cutter | 114 mm (4.5 in.) | 178 mm (7.0 in.) | |
Linerless cutter | 109 mm (4.3 in.) | N/A | ||
Peel-off, Rewind | 108 mm (4.25 in.) | 171 mm (6.75 in.) | ||
Total thickness (includes liner, if any) | Minimum | 0.058 mm (0.0023 in.) | 0.058 mm (0.0023 in.) | |
Maximum | 0.25 mm (0.010 in.) | |||
Maximum roll outside diameter | 203 mm on a 76-mm inside diameter core 8 in. on a 3-in. inside diameter core | |||
Inter-label gap* | Minimum | 2 mm (0.079 in.) | ||
Preferred | 3 mm (0.118 in.) | |||
Maximum | 4 mm (0.157 in.) | |||
Ticket/tag notch size (width x length)* | 6 mm x 3 mm (0.25 in. x 0.12 in.) | |||
Hole diameter* | 3.18 mm (0.125 in.) | |||
Notch or hole position (centered from inner media edge)* | Minimum | 3.8 mm (0.15 in.) | ||
Maximum | 57 mm (2.25 in.) | 90 mm (3.5 in.) | ||
Density, in Optical Density Units (ODU) (black mark)* | > 1.0 ODU | |||
Maximum media density* | ≤ 0.5 ODU | |||
Transmissive media sensor | 11 mm (7/16 in.) from inside edge | |||
