• ZT510 Industrial Printer User Guide
LABEL LENGTH MAX
LABEL LENGTH MAX

LABEL LENGTH MAX

Set a maximum label length that is at least 25.4 mm (1.0 in.) greater than the actual label length plus the interlabel gap. If you set this value too small, the printer assumes that continuous media is loaded and cannot calibrate.
User menu item:
Home Menu
 SETTINGS
Accepted values:
Specify a value that is at least 25.4 mm (1.0 in.) greater than the actual label length plus the interlabel gap. If you set the value to one that is smaller than the label length, the printer assumes that continuous media is loaded, and the printer cannot calibrate.
For example, if the label length is 152 mm (6.0 in.) including the interlabel gap, set the parameter for at least 178 mm (7.0 in.).
1
Label length (including interlabel gap)
2
Interlabel gap
3
Set the maximum label length to approximately this value
Related ZPL command(s):
^ML
SGD command used:
ezpl.label_length_max
Printer web page:
View and Modify Printer Settings
Media Setup
Maximum Length