ZT510 Industrial Printer User Guide

LOAD DEFAULTS

Restore specific printer, print server, and network settings back to the factory defaults. Use care when loading defaults because you will need to reload all settings that you changed manually. This menu item is available through two user menus with different default values for each.

For printers with Protected Mode enabled, you cannot modify this setting from the front panel. For more information, refer to the Zebra Link-OS PrintSecure Printer Administration Guide.

User menu item:	Home Menu TOOLS
Accepted values:	FACTORY—Restores all printer settings other than the network settings back to the factory defaults. Use care when loading defaults because you will need to reload all settings that you changed manually. NETWORK—Reinitializes the printer’s wired or wireless print server. With a wireless print server, the printer also reassociates with your wireless network. LAST SAVED—Loads settings from the last permanent save.
Related ZPL command(s):	FACTORY: ^JUF NETWORK: ^JUN LAST SAVED: ^JUR
Control panel key(s)	FACTORY: Hold FEED + PAUSE during printer power-up to reset the printer parameters to factory values. NETWORK: Hold CANCEL + PAUSE during printer power-up to reset the network parameters to factory values.
Printer web page:	FACTORY - View and Modify Printer Settings Restore Default Configuration NETWORK - Print Server Settings Reset Print Server LAST SAVED - View and Modify Printer Settings Restore Saved Configuration