Beeper Sequence | LED | Indication |
|---|---|---|
Standard Use | ||
Low, medium, high | Green | Power up |
User-configured | Green blink off, then on | A barcode was decoded |
None | Center green LED remains ON | Presentation mode is on |
4 low | Red | Transmission error |
5 low | Red | Conversion or format error |
Low, low, low, extra low | Red | RS-232 receive error |
High | None | A <BEL> character is received over RS-232 |
low, high, high, low | None | The attached aux scanner is drawing too much current. |
high, low | None | An unsupported device was plugged into the USB host, and/or the device failed enumeration. |
Image Capture | ||
None | All green, blinking | Snapshot mode started |
None | Return to steady green | Snapshot mode complete |
High, low state | Green (default) LED mode based upon hand-held/hands-free mode | Snapshot mode time-out |
5 clicks, then shutter sound | Green blinking | Snapshot taken |
EAS | ||
Sensormatic Tag Detected Any Time Beep (programmable) | N/A | A soft or hard tag is in the detected field. |
Sensormatic EAS Deactivation Fail Beep (programmable) | N/A | A tag is not deactivated, is considered live, and the type of tag (soft or hard) cannot be determined. |
High, low | N/A | EAS communication disconnect; the scanner disconnected from the Sensormatic control box. |
Low, high | N/A | EAS communication reconnect; the scanner reconnected to the Sensormatic control box. |
Parameter Programming | ||
Low, high | Red | Input error: incorrect bar code, programming sequence, or Cancel scanned |
High, low | Green | Number expected; enter value using numeric bar codes |
High, low, high, low | Green | Successful program exit with change in parameter setting |
ADF Programming | ||
Low/high/low | None | ADF transmit error |
High/low | Green | Number expected, enter another digit. Add leading zeros to the front if necessary. |
Low/low | Green | Alphanumeric expected, enter another alphanumeric character or scan the End of Message barcode |
High/high | Green blinking | ADF criteria or action is expected, enter another criteria or action or scan the Save Rule barcode |
High/low/low | Green | All criteria or actions cleared for current rule, continue entering rule |
High/low/high/low | Green (turns off after blinking) | Rule saved. Rule entry mode exited. |
Long low/long high | Red | Rule error. Entry error, wrong barcode scanned, or criteria/action list is too long for a rule. Re-enter criteria or action. |
Low beep | Green | Deleted last saved rule. The current rule is left intact. |
Low/high/high | Green | All rules deleted |
Long low/long high/long low/long high | Red | Out of rule memory. Erase some existing rules, then try to save rule again. |
Long low/long high/long low | Green (turns off after blinking) | Cancel rule entry. Rule entry mode exited because of an error or the user asked to exit rule entry. |
Macro PDF | ||
2 low | None | Buffered File ID error. A barcode not in the current MPDF sequence was scanned. |
2 long low | None | File ID error. A barcode not in the current MPDF sequence was scanned. |
3 long low | None | Out of memory. There is not enough buffer space to store the current MPDF symbol. |
4 long low | None | Bad symbology. Scanned a 1D or 2D barcode in an MPDF sequence, a duplicate MPDF label, a label in an incorrect order, or trying to transmit an empty or illegal MPDF field. |
5 long low | None | Flushing MPDF buffer |
Fast Warble | None | Aborting MPDF sequence |
Low/high beeps | None | Flushing an already empty MPDF buffer |
