After installing the battery, connect the tablet to external power and power up the tablet.
If you have not yet inserted the battery, remove it from the packaging.
On the back of the tablet, make sure the battery latch is slid to left and shows the red circle. Insert the bottom of the battery into the bay. Tilt the tray and press it down until it clicks securely into place.
The external power has two parts: the part that plugs into the power source and the adapter with a cord that plugs into your tablet. Join the two parts by plugging the power cord into the adapter to form one long cord.
To connect external power to the tablet, open the port door to expose the
Power Adapter Port
(1). Plug the AC adapter into this port on your tablet.
Plug the power cord into an outlet.
The battery charging indicator indicates the charge status.
State
Indication
Blinking green
The battery is charging.
Solid green
The battery charging is complete.
Red
The charging temperature is too high.
Press and release
Power
(1) in the center of the right side of the tablet to turn it on.
Keep the tablet on AC power until the battery is fully charged. However, you don’t have to wait until the tablet is fully charged to turn it on. The L10ax charges while you use it.
