1. TC22R Integrated Handheld RFID Reader Quick Start Guide
  2. Charging the Device
  • TC22R Integrated Handheld RFID Reader
Charging the Device

Charging the Device

To achieve optimal charging results, use only Zebra charging accessories and batteries. Charge batteries at room temperature with the device in Sleep mode.
The device goes into Sleep mode when you press Power or after a period of inactivity.
A battery charges from fully depleted to 90% in approximately 3 hours and 30 minutes. In many cases, a 90% charge provides enough charge for daily use. Depending on the usage profile, a full 100% charge may last for approximately 14 hours of use.
The device or accessory always performs battery charging in a safe and intelligent manner and indicates when charging is disabled due to abnormal temperatures via its LED, and a notification appears on the device display.
Temperature
Battery Charging Behavior
0 to 40°C (32 to 104°F)
Optimal charging range.
0 to 20°C (32 to 68°F)
Charging slows to optimize the JEITA requirements of the cell.
Below 0°C (32°F) / above 40°C (104°F)
Charging stops.
Above 55°C (131°F)
The device shuts down.