1. US Home Page
  2. US Home Page
  3. US Home Page
  4. TC53e/TC53e-RFID/TC58e Product Reference Guide
  5. Getting Started
  6. Charging the Device
  • TC53e/TC53e-RFID/TC58e Touch Computer
Charging the Device

Charging the Device

Use only Zebra charging accessories and batteries to achieve optimal charging results. Charge batteries at room temperature with the device in Sleep mode.
The device goes into Sleep mode when you press Power or after a period of inactivity.
A battery charges from fully depleted to 90% in approximately 2 hours. In many cases, a 90% charge provides enough charge for daily use. Depending on the usage profile, a full 100% charge may last for approximately 14 hours of use.
The device or accessory always performs battery charging in a safe and intelligent manner and indicates when charging is disabled due to abnormal temperatures via its LED, and a notification appears on the device display.
Temperature
Battery Charging Behavior
20 to 45°C (68 to 113°F)
Optimal charging range.
0 to 20°C (32 to 68°F) / 45 to 50°C (113 to 122°F)
Charging slows to optimize the JEITA requirements of the cell.
Below 0°C (32°F) / Above 50°C (122°F)
Charging stops.
Above 55°C (131°F)
The device shuts down.
To charge the main battery:
  1. Connect the charging accessory to the appropriate power source and connect it to the device.
  2. Insert the device into a cradle or attach to a power cable (minimum 9 VDC / 2 A).
    The device turns on and begins charging. The Charging/Notification LED blinks amber while charging, then turns solid green when fully charged.