1. TC53e/TC53e-RFID/TC58e Product Reference Guide
  2. Data Capture
  3. Scanning Considerations
  4. Scanning with Internal Imager
  • TC53e/TC53e-RFID/TC58e Touch Computer
Scanning with Internal Imager

Scanning with Internal Imager

Use the internal imager to capture barcode data.
To read a barcode or QR code, a scan-enabled application is required. The device contains the DataWedge Demonstration (DWDemo) app, which allows you to enable the imager, decode the barcode/QR code data, and display barcode content.
The SE55 displays a green dash-dot-dash aimer. The SE4720 displays a red dot aimer. The SE4770 displays a red crosshair aimer.
  1. Ensure that an application is open on the device and a text field is in focus (text cursor in text field).
  2. Point the exit window on the top of the device at a barcode or QR code.
    Image of scanning a barcode.
  3. Press and hold the scan button.
    The device projects the aiming pattern.
  4. Ensure the barcode or QR code is within the area formed in the aiming pattern.
    Aiming Patterns
    SE55
    SE4720
    SE4770
    Image of SE55 aiming pattern.
    SE4720 aiming pattern.
    Image of SES4770 aiming pattern.
    Aiming Patterns in Picklist Mode with Multiple Barcodes
    SE55
    SE4720
    SE4770
    Image of SE55 green dash dot dash scan.
    Image of SE4720 red dot scan.
    Image of SE4770 red crosshairs scan.
    When the device is in Picklist mode, it does not decode the barcode/QR code until the center of the crosshair touches the barcode/QR code.
    The Data Capture LED light turns green (red for the SE4720), and the device beeps, by default, to indicate that the barcode or QR code was decoded successfully.
  5. Release the scan button.
    The device displays the barcode or QR code data in the text field.