Number | Item | Description |
|---|---|---|
1 | Front camera (8MP) | Takes photos and videos. |
2 | Scan LED | Indicates data capture status. |
3 | Receiver | Use for audio playback in Handset mode.
For WWAN configurations only, the receiver design differs (three holes):  |
4 | Proximity/light sensor | Determines proximity and ambient light for controlling display backlight intensity. |
5 | Battery status LED | Indicates battery charging status while charging and application-generated notifications. |
6, 9 | Scan button | Initiates data capture (programmable). |
7 | Volume up/down button | Increase and decrease audio volume (programmable). |
8 | 6 in. LCD touch screen | Displays all information needed to operate the device. |
10 | PTT button | Typically used for PTT communications. |
Number | Item | Description |
|---|---|---|
1 | Power button | Turns the display on and off. Press and hold to power off, restart, or lock the device. |
2, 6 | Microphone | Use for communications in Handset/Handsfree mode, audio recording, and noise cancellation. |
3 | Exit window | Provides data capture using the imager. |
4 | UHF RFID | Integrated RFID. For premium RFID configurations only.
If an RFD40 or RFD90 sled is connected to the device, it overrides the integrated RFID. |
5 | Back common I/O 8 pins | Provides host communications, audio, and device charging via cables and accessories. |
7 | Battery release latches | Pinch both latches in and lift up to remove the battery. |
8 | Battery | Provides power to the device. |
9 | Hand strap points | Attachment points for the hand strap. |
10 | Rear camera (16MP) with flash | Takes photos and videos with flash to provide illumination for the camera. |
Number | Item | Description |
|---|---|---|
11 | Speaker | Provides audio output for video and music playback. Provides audio in speakerphone mode. |
12 | DC input pins | Power/ground for charging (5V through 9V). |
13 | Microphone | Use for communications in Handset/Handsfree mode, audio recording, and noise cancellation. |
14 | USB Type C and 2 charge pins | Provides power and communications to the device using an I/O USB-C interface with 2 charge pins. |
