Solutions
Hardware
Software
Services
Support and Downloads
About Zebra
Best Practices for Voice Deployment with Aruba WLAN Infrastructure
Infrastructure and Vendor Model Recommendations
Additional Configurations for Voice Multicast Applications
Best Practices for Voice Deployment with Aruba WLAN Infrastructure
Best Practices for Voice Deployment with Aruba WLAN Infrastructure
About This Guide
Notational Conventions
Icon Conventions
Related Documents
Device Settings
Default, Supported, and Recommended for Voice Device Settings
Device Wi-Fi Quality of Service (QoS) Tagging and Mapping
Network Settings and Device RF Characteristics
Recommended Environment
Device RF Capabilities
DBS Advantages in 2x2 MU-MIMO Devices
Important DBS Performance Considerations
Relevant Use Cases and Environments
Devices with Wi-Fi 6 Advantages
2x2 MU-MIMO and 1x1 MU-MIMO Devices Antenna Configuration
Air Medium and Time Sharing
Multipath and Interference
Coverage and Range
Infrastructure and Vendor Model Recommendations
General WLAN Recommendations
WLAN Infrastructure Recommendations for Voice Support
Aruba Infrastructure Recommendations for Voice Quality
Additional Configurations for Voice Multicast Applications
Zebra Recommended WLC, AP Models, and Firmware Versions
Additional Configurations for Voice Multicast Applications
Additional Configurations for Voice Multicast Applications
Zebra PTT Express Deployment
The following lists recommendations of additional Aruba infrastructure settings to support PTT Express:
dynamic-multicast-optimization
Converts Multicast to Unicast with a higher data rate
dmo-channel-utilization-threshold 90
Falls back to Multicast traffic from Unicast if the channel utilization reaches 90%
Infrastructure and Vendor Model Recommendations