Channel Width and Power Spectral Density

Wi-Fi 6E (Tri-Band) including Voice, with Aruba WLAN Infrastructure
Introduction
Device Settings
Common Infrastructure Setting Recommendations
Aruba Infrastructure Setting Recommendations
- PSC Enforcement
Security Recommendations While Deploying Zebra Clients in a 6 GHz Network
Zebra-Recommended WLC and AP Models by Vendor
Channel and Regulatory Information
Band Preference
Reduced Neighbor Report and 802.11kv
Voice Calls, Video Streaming, and Conferencing
Multiuser MIMO
Zebra Devices Operating with Standard Power
Glossary of Abbreviations

The following section describes the relationships among Power Spectral Density (PSD), Equivalent Isotropically Radiated Power (EIRP), and channel width.

EIRP = PSD + 10 log (channel width)

For example, with a PSD of 5 dBm/MHz and a channel width of 20 MHz, the EIRP is:

EIRP = 5 dBm/MHz = 10 log (20 MHz) = 5 = 13 =18 dBm

in the following diagrams for illustration purposes only. 320 MHz channels will be added in Wi-Fi 7.