Use the USB connection to install applications onto the device.
When connecting the device to a host computer, follow the host computer’s instructions for connecting and disconnecting USB devices, to avoid damaging or corrupting files.
Ensure that the ADB drivers are installed on the host computer.
Using a T10 Torx screwdriver, remove four screws securing the top cover to the device.
When the user connects a USB cable to the USB-C port on top of the device, the USB and RS-232 ports on the bottom are disabled.
Connect the device to a host computer using the Rugged Charge or a USB cable.
On the device, pull down the Notification panel and touch
Charging this device via USB
.
By default,
No data transfer
is selected.
On the host computer, open a file explorer application.
On the host computer, copy the application APK file from the host computer to the device.
Disconnect the device from the host computer.
Swipe the screen up and select to view files on the Internal Storage.
Locate the application APK file.
Touch the application file.
Touch
Continue
to install the app or
Cancel
to stop the installation.
To confirm installation and accept what the application affects, touch
Install
. Otherwise, touch
Cancel
.
Touch
Open
to open the application or
Done
to exit the installation process.
The application appears in the App list.
Replace the top cover.
Secure the top cover to the device using the four screws.
to view files on the Internal Storage.
