Solutions
Hardware
Software
Services
Support and Downloads
About Zebra
WS50/WS50 RFID Quick Start Guide
Locking the Trigger Assembly
WS50/WS50 RFID Quick Start Guide
WS50/WS50 RFID Quick Start Guide
Device Features
Scanner Features
Camera Features
Setting Up the Device
Installing the Battery
Installing the Battery for the WS50 RFID Scanner
Installing the Trigger and Shell Assembly for the Scanner
Changing the Trigger Position for the Converged Scanner
Installing the Back of Hand Mount
Assembling the Back of Hand Mount with the External Antenna
Installing the Wrist Mount Assembly
Assembling the Wrist Mount
Installing the WS50 into the Clip Mount
Removing the WS50 from the Clip Mount
Wearing the WS50
Removing the Trigger and Shell Assembly
Removing the Wrist Mount Assembly
Replacing the Battery
Removing the WS50 RFID Battery
Charging the Device
Charging the Main Battery
Charging the Spare Battery
Charging Indicators
Charging Temperature
2-Slot Charge Only Cradle
10-Slot Charge Only Cradle
5-Slot Ethernet Cradle with Battery Charger
4-Slot Battery Charger
20-Slot Battery Charger
USB Charge Cable
Ergonomic Recommendations
Locking the Trigger Assembly
Locking the Trigger Assembly
To prevent the operator from removing the trigger assembly, secure it on the Converged Scanner using a screw (provided).
On the bottom of the device, lift the finger comfort pad from the front of the device, and then lift it from the rear.
To secure the trigger assembly (1), use a Torx T4 screwdriver to tighten a screw (provided) with a torque requirement of 0.9 kgf-cm.
