Solutions
Hardware
Software
Services
Support and Downloads
About Zebra
WS50/WS50 RFID Quick Start Guide
Removing the Wrist Mount Assembly
WS50/WS50 RFID Quick Start Guide
WS50/WS50 RFID Quick Start Guide
Device Features
Scanner Features
Camera Features
Setting Up the Device
Installing the Battery
Installing the Battery for the WS50 RFID Scanner
Installing the Trigger and Shell Assembly for the Scanner
Changing the Trigger Position for the Converged Scanner
Installing the Back of Hand Mount
Assembling the Back of Hand Mount with the External Antenna
Installing the Wrist Mount Assembly
Assembling the Wrist Mount
Installing the WS50 into the Clip Mount
Removing the WS50 from the Clip Mount
Wearing the WS50
Removing the Trigger and Shell Assembly
Removing the Wrist Mount Assembly
Replacing the Battery
Removing the WS50 RFID Battery
Charging the Device
Charging the Main Battery
Charging the Spare Battery
Charging Indicators
Charging Temperature
2-Slot Charge Only Cradle
10-Slot Charge Only Cradle
5-Slot Ethernet Cradle with Battery Charger
4-Slot Battery Charger
20-Slot Battery Charger
USB Charge Cable
Ergonomic Recommendations
Removing the Wrist Mount Assembly
Removing the Wrist Mount Assembly
Unmount the device and shell from the wrist mount assembly for charging. Replace the device and shell to the assembly after charging.
Press down on the wrist mount release tab (3).
Lift the device, bottom first, from the wrist mount holder.
The locking tabs (2) are lifted away from the locking slots (1).
Remove the device in the shell from the wrist mount assembly.
To remove the device (2) from the shell (3), press down the shell release tab (1), and then slide the device away from the shell (3).
