Solutions
Hardware
Software
Services
Support and Downloads
About Zebra
WS50/WS50 RFID Quick Start Guide
Mounting the Camera
WS50/WS50 RFID Quick Start Guide
WS50/WS50 RFID Quick Start Guide
Device Features
Scanner Features
Camera Features
Setting Up the Device
Installing the Battery
Installing the Battery in the WS50 RFID Scanner
Installing the Trigger and Shell Assembly to the Scanner
Changing the Trigger Position for the Converged Scanner
Installing the Back of Hand Mount
Assembling the Back of Hand Mount with the External Antenna
Installing the Wrist Mount Assembly
Assembling the Wrist Mount
Installing the Device into the Clip Mount
Removing the Device from the Clip Mount
Wearing the Device
Removing the Trigger and Shell Assembly
Removing the Wrist Mount Assembly
Replacing the Battery
Removing the WS50 RFID Battery
Mounting the Scanner
Mounting the Camera
Charging the Device
Charging the Main Battery
Charging the Spare Battery
Charging Indicators
Charging Temperature
2-Slot Charge-Only Cradle
10-Slot Charge-Only Cradle
5-Slot Ethernet Cradle with Battery Charger
4-Slot Battery Charger
20-Slot Battery Charger
USB Charge Cable
Ergonomic Recommendations
Mounting the Camera
Mounting the Camera
The following instructions describe how to mount the Camera onto your wrist. The device can be worn on either the right or left hand.
Insert the wrist strap through the slots of the wrist mount assembly, ensuring you leave enough slack for your hand to pass through.
Insert your hand through the opening formed by the wrist strap and the wrist mount assembly.
Tighten the thin wrist strap by pulling each end to secure it comfortably around your wrist.
Fasten the strap at both ends using the hook-and-loop fasteners.
×