1. GK420d Desktop Printer User Guide
  2. Getting Started
  3. Connecting your Printer to a Device
  4. Interface Cable Requirements
  5. Serial Communications
  6. ZPL ^SC Command
  • GK420d Desktop Printer User Guide
ZPL ^SC Command

ZPL ^SC Command

Use the Set Communications (
^SC
) command to change the communications settings on the printer.
  1. With the host computer set at the same communications settings as the printer, send the
    ^SC
     command to change the printer to the desired settings.
  2. Change the host computer settings to match the new printer settings.
Refer to the ZPL Programming Guide for more information about this command.