1. ZD100DA Direct Thermal Desktop Printer User Guide
  2. Setup
  3. Connecting Your Printer to a Device
  • ZD100DA Direct Thermal Desktop Printer User Guide
Connecting Your Printer to a Device
View content for :
Product:

Connecting Your Printer to a Device

Zebra printers support a variety of interface options and configurations.
  1. Decide how you will connect to the printer.
    Your printer supports the following interface options and configurations:
    The central device can be a Windows PC or laptop running the operating systems listed in Setup for Windows OS, an Android device, or an Apple device.
  2. Switch the printer power OFF (see POWER Button).
  3. Connect the printer to the computer or device you will use to manage the printer.
  4. Run Zebra Setup Utilities (ZSU) from your central device (see Running the Printer Installation Wizard).
    Zebra Setup Utilities (ZSU) are designed to assist you with installing these interfaces. (For ZSU user guides, go to zebra.com/setup.)
    Wait to turn the printer power ON until instructed by the Installation Wizard to do so. Keep the power switch in the OFF position when attaching the interface cable. The power cord must be inserted into the power supply and the power receptacle on the back of the printer before you connect or disconnect the communications cables.
    The ZSU wizard installs the Zebra Windows drivers.
  5. When the ZSU Installation Wizard prompts you do to so, turn printer power ON, then follow the on-screen instructions to complete the printer setup.