1. ZD100DA Direct Thermal Desktop Printer User Guide
  2. Setup
  3. Test Printing with the Configuration Report
  • ZD100DA Direct Thermal Desktop Printer User Guide
Test Printing with the Configuration Report
View content for :
Product:

Test Printing with the Configuration Report

Before you connect the printer to a computer, ensure that the printer is in proper working order by printing a configuration report.
The information in the configuration report may assist with printer installation and troubleshooting.
  1. Make sure the media is loaded properly in the printer and the printer's top cover is closed.
  2. Turn the printer power ON.
  3. After the printer is ready (STATUS indicator lights up solid green), press and hold the
    FEED
     button for approximately two seconds, until the STATUS indicator blinks once, then release the button.
The Printer and Network Configuration Reports print. When the printer stops, the STATUS indicator turns solid green.
Test Printing with a Configuration report.
If you cannot print these reports, go to Troubleshooting.