Using a Configuration Script

Using a Configuration Script

Complete the setup by sending the ZPL script to the printer through the port selected at the beginning of this procedure.
For printers with Protected Mode enabled, you need to provide the Protected Mode password to change certain settings. For more information, refer to the Zebra Link-OS PrintSecure Printer Administration Guide.
  1. Verify that the printer is connected to the computer through the wired cable connection to USB port.
  2. If you have not already done so, turn ON the printer.
  3. On the
    Review and Send ZPL for Wireless
    window, click
    Finish
    .
  4. The printer sends the ZPL script to the printer through the selected port. The
    Wireless Setup Wizard
    screen closes.
  5. Turn the printer OFF and then back ON.