Standard printers use ribbon that is coated on the outside. An optional ribbon spindle is available to use ribbon that is coated on the inside. Contact your authorized Zebra reseller for ordering information.
Ribbon width MINIMUM * **
20 mm (0.79 in.)
Ribbon width MAXIMUM
110 mm (4.33 in.)
Ribbon length MAXIUMUM
450 m (1476 ft)
Ribbon core inside diameter
25 mm (1 in.)
Ribbon roll outside diameter MAXIMUM
81.3 mm (3.2 in.)
* Zebra recommends using ribbon that is at least as wide as the media to protect the printhead from wear.
** Depending on your application, you may be able to use ribbon narrower than 51 mm (2 in.), as long as the ribbon is wider than the media being used. To use a narrower ribbon, test the ribbon’s performance with your media to assure that you get the desired results.
