1. DS5502 Fixed Mount Scanner Quick Start Guide
  2. Using the 3-in-1 Multi-Mount
  3. Removing the Wide Base
  • DS5502 Quick Start Guide
Removing the Wide Base

Removing the Wide Base

The following describes how to remove the wide base from the 3-in-1 multi-mount.
  1. Using a Philips-head screwdriver, fully unscrew the screw located at the rear of the wide base, making sure it is not attached to the narrow base.
  2. With one hand, grasp the main arm and then use your other hand to hold down the wide base.
  3. Pivot the narrow base away from the wide base notch (1), and then lift it out.