1. DS5502 Fixed Mount Scanner Quick Start Guide
  2. Using the Gooseneck Stand
  • DS5502 Quick Start Guide
Using the Gooseneck Stand

Using the Gooseneck Stand

Use the optional gooseneck stand to mount the scanner.
  1. Unscrew the wingnut located at the bottom of the gooseneck.
  2. Insert the threaded end of the gooseneck into the base.
  3. From the underside of the base, fasten the gooseneck by screwing and tightening the wingnut into it.
  4. Attach the power cable to the scanner, and then insert the scanner into the cup of the gooseneck stand.
    Use the 90-degree cable when the device is table-top mounted.