Sensormatic Deactivation Timeout
View content for :
Platform:

Sensormatic Deactivation Timeout

Parameter #
982
This parameter determines the time that EAS tag deactivation is allowed after a barcode decode.
This option only applies to Sensormatic Barcode Interlock Mode.
When a tag is deactivated, additional deactivations can occur if the deactivation period is still active.
To set the EAS deactivation time from 1 to 29 seconds, scan Sensormatic Deactivation Timeout, and then scan two numeric barcodes from Numeric Barcodes. Enter a leading zero for single-digit numbers.
For example, to set the deactivation time period to 8 seconds, scan Sensormatic Deactivation Timeout, and then scan the 0 and 8 barcodes. To correct an error or change the selection, scan Cancel.
Sensormatic Deactivation Timeout