IBM 468X/469X Interface Connection
IBM 468X/469X Interface Connection
View content for :
Product:

IBM 468X/469X Interface Connection

To connect the scanner to the IBM host computer:
  1. Attach the modular connector of the IBM 46XX interface cable to the host port as described in Connecting Cables.
  2. Connect the other end of the IBM 46XX interface cable to the appropriate port on the host (typically Port 9).
  3. Optionally connect a hand-held auxiliary scanner to the aux port.
  4. If connecting an auxiliary scanner, connect the power supply to the power port and an AC outlet.
  5. The scanner automatically detects the host interface type, but there is no default setting. Scan the appropriate barcode from Port Address to select the port address.
  6. To modify any other parameter options, scan the appropriate barcodes in this guide.
    The only required configuration is the port address. The IBM system typically controls other scanner parameters.
If problems occur with the system, see Troubleshooting.