Crop to Pixel Addresses
Crop to Pixel Addresses
View content for :
Platform:

Crop to Pixel Addresses

Parameter #
315
(SSI # F4h F0h 3Bh)
(Top)
Parameter #
316
(SSI # F4h F0h 3Ch)
(Left)
Parameter #
317
(SSI # F4h F0h 3Dh)
(Bottom)
Parameter #
318
(SSI # F4h F0h 3Eh)
(Right)
When Image Cropping is enabled, use this parameter to set the pixel addresses.
The pixel addresses value range is (0,0) to
[1919]
x
[1199]
.
  • Top Pixel Address - A value with the left pixel address to begin an image crop.
  • Left Pixel Address -  A value with the top pixel address to begin an image crop.
  • Right Pixel Address - A value with the right pixel address to end an image crop.
  • Bottom Pixel Address - A value with the right pixel address to end an image crop.
Columns are numbered from 0 to
[1919]
, rows from 0 to
[1199]
. Specify values for Top, Left, Bottom, and Right, where Top and Bottom correspond to row pixel addresses, and Left and Right correspond to column pixel addresses.
The imager has a cropping resolution of 4 pixels. Setting the cropping area to less than 4 pixels (after resolution adjustment, see Image Size) transfers the entire image.
To crop to the pixel addresses, enable Image Cropping, and then scan four numeric barcodes from Numeric Barcodes representing the value.
Top Pixel Address (0 -
[1199]
 Decimal)
Left Pixel Address (0 -
[1919]
 Decimal)
Bottom Pixel Address (0 -
[1199]
 Decimal)
Right Pixel Address (0 -
[1919]
Decimal)