To connect the scanner between a keyboard and host computer:
Turn off the host and unplug the keyboard connector.
Connect the modular connector of the Y-cable to the host port as described in Connecting Cables.
Connect the round male DIN host connector of the Y-cable to the keyboard port on the host device.
Connect the round female DIN keyboard connector of the Y-cable to the keyboard connector.
Optionally connect a hand-held auxiliary scanner to theaux port.
If connecting an auxiliary scanner, connect the power supply to the power port and an AC outlet.
Ensure that all connections are secure.
Turn on the host system.
The scanner automatically detects the host interface type and uses the default setting. If the default (*) does not meet your requirements, see Keyboard Wedge Host Parameters.
To modify other parameter options, scan the appropriate barcodes in this guide.
