Set Lengths for Code 11
Set Lengths for Code 11
View content for :
Platform:

Set Lengths for Code 11

L1
Parameter #
28
(SSI #1Ch)
L2
Parameter #
29
(SSI #1Dh)
This parameter set lengths for Code 11.
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. Set lengths for Code 11 to any length, one or two discrete lengths, or lengths within a specific range. The default is
4 to 55
.
The maximum range is 0-80.
When setting lengths, enter a leading zero for single digit numbers.
  • One Discrete Length - Decode only Code 11 symbols containing a selected length.
  • Two Discrete Lengths - Decode only Code 11 symbols containing either of two lengths.
  • Length Within Range - Decode Code 11 symbols with a specific length range.
  • Any Length - Decode Code 11 symbols containing any number of characters within the scanner’s capability.
Select lengths using barcodes in Numeric Barcodes. To correct an error or change the selection, scan Cancel.
For example:
  • To decode only Code 11 symbols with 14 characters, scan Code 11 - One Discrete Length, and then scan 1, 4.
  • To decode only Code 11 symbols containing either 2 or 14 characters, scan Code 11 - Two Discrete Lengths, and then scan 0, 2, 1, 4.
  • To decode Code 11 symbols containing between 4 and 12 characters, scan Code 11 - Length Within Range, and then scan 0, 4, 1, 2.
Code 11 - One Discrete Length
Code 11 - Two Discrete Lengths
*Code 11 - Length Within Range (Default:
4 to 55
)
Code 11 - Any Length