Decode UPC/EAN/JAN Supplementals
View content for :
Platform:

Decode UPC/EAN/JAN Supplementals

Parameter #
16
(SSI # 10h)
This parameter decodes supplementals, which are barcodes appended according to specific format conventions (for example, UPC A+2, UPC E+2, EAN 13+2). .
  • Decode UPC/EAN/JAN with Supplementals Only - The scanner only decodes UPC/EAN/JAN symbols with supplemental characters, and ignores symbols without supplementals.
  • Ignore UPC/EAN/JAN Supplementals - When presented with a UPC/EAN/JAN plus supplemental symbol, the scanner decodes UPC/EAN/JAN and ignores the supplemental characters.
  • Autodiscriminate UPC/EAN/JAN with Supplementals - The scanner decodes UPC/EAN/JAN symbols with supplemental characters immediately. If the symbol does not have a supplemental, the scanner must decode the barcode the number of times set via UPC/EAN/JAN Supplemental Redundancy before transmitting its data to confirm that there is no supplemental.
  • Enable 378/379 Supplemental Mode
  • Enable 978/979 Supplemental Mode
If you select 978/979 Supplemental Mode and are scanning Bookland EAN barcodes, see Bookland EAN, and select a format using Bookland ISBN Format.
  • Enable 977 Supplemental Mode
  • Enable 414/419/434/439 Supplemental Mode
  • Enable 491 Supplemental Mode
  • Enable Smart Supplemental Mode - This applies to EAN-13 barcodes starting with any prefix listed previously.
  • Supplemental User-Programmable Type 1 - This applies to EAN-13 barcodes starting with a 3-digit user-defined prefix. Set this using User Programmable Supplementals.
  • Supplemental User-Programmable Type 1 and 2 - This applies to EAN-13 barcodes starting with either of two 3-digit user-defined prefixes. Set the prefixes using User Programmable Supplementals.
  • Smart Supplemental Plus User-Programmable 1 - This applies to EAN-13 barcodes starting with any prefix listed previously or the prefix set using User Programmable Supplementals.
  • Smart Supplemental Plus User-Programmable 1 and 2 - This applies to EAN-13 barcodes starting with any prefix listed previously or one of the two user-defined prefixes set using User Programmable Supplementals.
To minimize the risk of invalid data transmission, select either to decode or ignore supplemental characters.
Decode UPC/EAN/JAN With Supplementals Only (1)
*Ignore UPC/EAN/JAN Supplementals (0)
Autodiscriminate UPC/EAN/JAN with Supplementals (2)
Enable 378/379 Supplemental Mode (4)
Enable 978/979 Supplemental Mode (5)
Enable 977 Supplemental Mode (7)
Enable 414/419/434/439 Supplemental Mode (6)
Enable 491 Supplemental Mode (8)
Enable Smart Supplemental Mode (3)
Supplemental User-Programmable Type 1 (9)
Supplemental User-Programmable Type 1 and 2 (10)
Smart Supplemental Plus User-Programmable 1 (11)
Smart Supplemental Plus User-Programmable 1 and 2 (12)