Connect devices can be mounted vertically or horizontally using a bracket.
Hardware must be provided by the customer to accommodate mounting material and thickness.
The equipment is only suitable for mounting at heights less than 2m.
Remove the base of the Connect device.
Install the four M3x5 screws (not included in the kit) from the base to attach the device to the bracket. (Maximum torque: 30 in-lbs)
Ensure that the bracket is mounted to the surface before inserting the device into the Connect Hub or Cradle.
Connect devices can be mounted upside down, on top of a countertop, and under a countertop using the mounting bracket. When installing the mounting bracket onto the device, use caution to avoid obstructing the headset jack.
