Number | Item | Description |
|---|---|---|
1 | Front microphones | Use for voice communications or audio recordings. |
2 | Windows Hello infrared LED | Illuminates your face with infrared (IR) light during Windows Hello face authentication. |
3 | Windows Hello infrared camera | Captures your face during Windows Hello face authentication. |
4 | Front camera | Use for video conferencing. |
5 | Front camera LED | Illuminates when the front camera is active. |
6 | Light sensor | Determines ambient light for controlling display backlight intensity. |
7 | Right access door | Secure door for accessing USB ports. |
8 | Touch screen | Displays all information needed to operate the device. |
9 | Dock alignment slot | Assists in aligning the tablet with the dock. |
10 | Speakers | Provides audio output. |
11 | Dock USB connector | Provides USB communication through the dock. |
12 | Charging indicator | Indicates power state and battery charging status while charging and application-generated notifications. |
13 | Keyboard/shoulder strap mount slots | Provides alignment and mounting of keyboard and shoulder strap clips. |
14 | Power button | Turns the display on and off. Press and release to turn on the device. Press and hold to restart the device. Provides finger print biometric authentication (optional). |
15 | + button | Programmable button (increase volume - default). |
16 | - button | Programmable button (decrease volume - default). |
17 | Keyboard interface connector | Provides power and communication with the keyboard. |
18 | P3 button | Programmable button (keyboard shortcut Ctrl+Alt+Del - default). |
19 | Kensington security slot | Provides mounting a security cable to prevent theft or unauthorized use of the tablet. |
20 | P2 button | Programmable button (opens Copilot application - default). |
21 | P1 button | Programmable button (open Zebra Control Hub application - default). |
22 | Dock power / antenna connector | Provides power and antenna connection through the dock. |
Number | Item | Description |
|---|---|---|
1 | Stylus garage | Provides a place for holding the stylus. |
2 | USB-C Thunderbolt 4 port | Provides communication with a host computer and accessories and charging. |
3 | USB-A 3.1 port | Provides communication with accessories such as scanners and wired headsets. |
Number | Item | Description |
|---|---|---|
1 | USB-C Thunderbolt 4 port | Provides communication with a host computer and accessories and provides charging. |
2 | Scan button (on tablets with internal scanner) Programmable button (on tablets without internal scanner) | Initiates barcode data capture when a scan-enabled application is active. Programmable button - (no action - default) |
Number | Item | Description |
|---|---|---|
1 | Stylus mount | Provides mounting for a stylus tether. |
2 | Exhaust vent | Provide airflow out of the tablet. |
3 | NFC antenna | Reads NFC cards. |
4 | Accessory mount point locations | Indicates mounting location points on polymer film for accessory captive screws. Do not remove the polymer film. |
5 | Rear camera | Autofocus camera that takes photos, and captures barcode data. |
6 | Rear camera LED flash | Provides illumination for the camera. |
7 | Scanner exit window | Provides data capture using the internal imager (optional). |
8 | Communication expansion port | Provides USB communication and power to an accessory. |
9 | Battery release latches | Releases the battery. |
10 | Battery Blank Battery Pack (optional) | Provides power to the tablet. Provides water and dust sealing when used in fixed mount installation when a battery is not required. |
11 | Dock alignment slot | Assists in aligning the tablet with the dock. |
12 | Solid-state drive cover | Provides access to the internal solid-state drive. |
13 | Intake vent | Provides airflow into the tablet. |
Number | Item | Description |
|---|---|---|
1 | Stylus mount | Provides mounting for a stylus tether. |
2 | Accessory mount point locations | Indicates mounting location points on polymer film for accessory captive screws. Do not remove the polymer film. |
3 | Exhaust vent | Provide airflow out of the tablet. |
4 | NFC antenna | Reads NFC cards. |
5 | Rear camera | Autofocus camera that takes photos, and captures barcode data. |
6 | Rear camera LED flash | Provides illumination for the camera. |
7 | Scanner exit window | Provides data capture using the internal imager (optional). |
8 | Expansion Module | Provides Ethernet and RS-232 Serial communication. |
9 | Battery release latches | Releases the battery. |
10 | Battery Blank Battery Pack (optional) | Provides power to the tablet. Provides water and dust sealing when used in fixed mount installation when a battery is not required. |
11 | Dock alignment slot | Assists in aligning the tablet with the dock. |
12 | Solid-state drive cover | Provides access to the internal solid-state drive. |
13 | Intake vent | Provides airflow into the tablet. |
Number | Item | Description |
|---|---|---|
1 | Ethernet port | Provides Ethernet connection to the tablet. |
2 | RS-232 connector | Provides a serial RS-232 connection to the tablet. To enable the port, refer to the ET6x Product Reference Guide for Windows. |
