1. ET6x Windows Quick Start Guide
  2. Scanning with the Internal Scanner
  • ET6xW Rugged Enterprise Tablet Quick Start Guide
Scanning with the Internal Scanner

Scanning with the Internal Scanner

Use the internal imager to capture barcode data.
Use the Zebra 123Scan utility to configure the scanner. Go to zebra.com/us/en/support-downloads/software/scanner-software/123scan-utility.html.
  1. Ensure that an app is open on the device, and a text field is in focus (the text cursor is in the text field).
  2. Point the exit window of the device at a barcode.
  3. Press and hold the scan button.
    scanning
    The aiming dot with illumination turns on to assist in aiming.
  4. Ensure the barcode is within the area formed by the aiming pattern. The aiming dot is used for increased visibility in bright lighting conditions.
    SE55 Aiming Pattern
    se55 aiming pattern
    SE55 Aiming for Pick List Mode with Multiple Barcodes
    se55 aiming pattern
    When the device is in Pick List Mode, the device does not decode the barcode until the center of the crosshair touches the barcode.
    A beep sounds, by default, to indicate the barcode was decoded successfully.
  5. Release the scan button.
    The captured data displays in the text field.