View Inventory Results
View Inventory Results

View Inventory Results

To view Inventory results:
  1. Tap
    Inventory
     from the Home or Menu screen.
  2. Tap
    Start
     to start the rapid read inventory operation.
    The
    Start
     button changes to
    Stop
    .
  3. Tap
    Stop
     to stop the read inventory operation.
    The scan trigger on the device can also start and stop the inventory operation. Press the trigger to start, continue to hold and release to stop.
  4. To filter information by type, tap the Memory Bank dropdown menu and select User, Reserved, TID, or EPC.
  5. The tag ID selected can be used to locate, set pre-filters and tag write. After selecting a tag, tap and select
    Locate Tag
    ,
    Pre Filters
    , or
    Tag Write
    .
Progressing to another screen does not halt the operation. However, attempting to make changes or perform another operation while this operation is in process results in an error.
Tags are fully convertible to ASCII format. ASCII mode may be enabled by selecting
Settings
 >
Application Settings
 >
ASCII Mode
.