The Navigation Bar consists of the following tabs:
Readers
- displays a list of connected readers and available readers. Upon initial launch of the application, this is the tab that displays, unless the connection to the reader is over USB/CommonIO.
RFID
- select from RFID Settings, Locate Tag, Pre Filters, and Tag Write. This is the tab that displays most of the time when launching the application. If the reader has been previously connected to the app or the reader is connected over USB/Common IO.
Scan
- scan barcodes, view the list of scanned barcodes, or clear the scanned list.
Available only on RFID sleds with a built-in imager.
Settings
- configure General, RFID, Application, and Scan settings.
