• 123RFID Mobile Application User Guide
Application Settings
Application Settings

Application Settings

To access Application Settings, from the bottom navigation bar, tap
Settings
 >
Application
 or tap >
Settings
 >
Application
.
The Application Settings screen includes:
  • Auto Reconnect Reader
     - When checked, the device connects to the RFID service which manages the connection to the reader.
  • Reader Connection Notification
     - When checked, the application notifies the user when the reader is connected or disconnected.
  • Reader Battery Status Notification
     - When checked, the application notifies the user when the battery has reached specific critical states.
  • Export Data
     - When checked, the application writes the inventoried RFID data to a file when the inventory operation stops. On Android platforms the file is saved in a fixed directory. Check the files in file browsing in the Inventory directory (Sdcard/inventory/<files>). The files may be copied to a PC.
    When
    Profile
     is set to
    Cycle Count
     and
    Export Data
     is enabled: If you start/stop inventory multiple times from the same screen, it will append cycle count data to existing data and generate a csv file (delete old csv) rather that creating a new csv file on each start/stop.
  • Tag List Match Mode
     - Check to enable matching mode.
  • Show Friendly Names
     - Check to show the tag's friendly names instead of EPC ID.
    Show friendly names
     is only available when
    Tag List Match Mode
     is enabled.
  • ASCII Mode
     - Displays tag ID in ASCII format. If the full tag ID or memory bank data is convertible to ASCII format, then the application only shows the same. Inventory, Locate, Access, and Pre Filters show ASCII mode represented data in respective sections.