To access the Antenna screen, from the bottom navigation bar, tap
Settings
>
RFID
>
Advanced Reader Options
>
Antenna
. The Antenna screen displays the following:
Power Level
- Displays the current selection and a text box for available power levels (as reported by the device). The default setting is 27.0 dBm (shown as 270; the value displayed is in units of tens of dBm). Japan units are set to a different default power level depending on the SKU type. The minimum power level when DPO is enabled is 3.1 dBm. When DPO is disabled, the minimum power level is 0 dBm.
Link Profile
- Displays the current selection and includes a drop-down list of available link profiles (reported by the device). Link Profile display format is as follows: Return link bit data rate in bis per second (e.g., 60000 -> 60 Kbs); Miller Value (e.g., MV_4 -> Miller 4); thus profile name M4 240K (240K becomes BLF) modulation type (PR ASK is the only one supported).
PIE
- This value has no units and is either 1500 and 2000 minimum.
Tari
- The applicable Tari value in thousands of microseconds (e.g., 6250 -> 6.25 microseconds).
