To access the Start and Stop Triggers screen, from the bottom navigation bar, tap
Settings
>
RFID
>
Advanced Reader Options
>
Start/Stop Triggers
.
Start Trigger Periodic
displays the
Period
input box (in milliseconds).
The
Stop Trigger Duration
,
Tag Observation
and
N attempts
display numeric value input boxes.
All time entries are in milliseconds, and all required details for saving triggers to the reader must be entered, or the application does not save the trigger settings to the reader.
Required input for
Start/Stop Trigger
settings are as follows:
Start Trigger
Immediate
(default)
Handheld
- Select either the
Trigger Pressed
or
Trigger Released
check box.
Periodic
- Enter the period of time in milliseconds.
Stop Trigger
Immediate
(default)
Hand-held
- Select either the
Trigger Pressed
or
Trigger Released
check box along with Timeout in milliseconds.
Duration
- Enter duration in milliseconds.
Tag Observation
- Enter the tag count along with timeout in milliseconds.
N Attempts
- Enter the number of attempts along with timeout in milliseconds.
If the
Start Trigger
type is set to Hand-held trigger (pressed or released), the application sets the repeat for the operation to ensure the use case if repeated operations can be demonstrated.
If any trigger is defined as
Hand-held
, the application does not act on immediate trigger type for a hand-held trigger action.
